config GPRS setting

translate.gif facebook-share-icon.gif
View 3422
How to config GPRS setting

How to config GPRS setting
User must send SMS via cell phone or software to set up IP, port and APN before starting GPRS.

1 Setting up APN
1.1 format "APN123456+Space+Your local APN"
1.2 eg. Send SMS command “APN123456 www.dtac.co.th”. If succeeded, “APN OK” is returned by the tracker in SMS.
Notes: 123456 refers to password and www.dtac.co.th APN's Network Operator of Dtac.

2 IP and port setup
2.1format "adminip + 123456 + Space + IP Address + Space + Port Number"
2.2 eg,Send SMS command “adminip123456 202.105.135.50 9000” to the tracker device, If succeeded, “adminip OK” is returned by the device in SMS.( 123456 is default password,202.105.135.50 is IP,9000 is port) or (adminip123456 202.104.150.75 9000)

3 Modes switch between “SMS” and “GPRS”
The default mode is “SMS”
3.1 Send SMS “GPRS+password” to the unit, and it will reply “GPRS ok!” and switch to “GPRS” mode.
3.2 Send SMS “SMS+password” to the unit, it will reply “SMS ok!” and restore to “SMS” mode.



Other Content